Polyethylene

Crosslinked | Extruded

Crosslinked

Product Characteristics

Low water absorption and vapor transmission

Smooth aesthetically
pleasing surface

Excellent chemical Resistance

Excellent strength and shock absorption.

Excellent buoyancy

Good thermal insulation

Crosslinked, closed-cell polyolefin foams are smooth, inert, nontoxic, contain no CFC, HCFC or hydrocarbon blowing agents and are available in a variety of colors and grades to achieve varied physical properties.

Roll products are a fine celled, irradiated crosslinked foam with a smooth surface and chemical resistant. Our bun product is extremely fine-celled chemically crosslinked closed cell polyolefin foam for thicker applications with a smooth surface and chemical resistance.

Functions include packaging, including static dissipative, thermal and impact insulation, gaskets, seals, cushioning, buoyancy, dunnage (class A), EKG and electro surgical devices, transdermal pads, cervical collars, floor underlayment, joint and building filler strips, window glazing tape and aircraft interior.

Helpful links:
www.sekisuivoltek.com
www.palzivna.com
www.armacell.com
www.worldwidefoam.com

	2 lb. Bun	4 lb. Bun	8 lb. Bun	10 lb. Bun	2 lb. Roll	2 lb. EVA Roll	4 lb. Roll	4 lb. EVA Roll	6 lb. Roll	6 lb. EVA Roll	12 lb. Roll
DENSITY LB/FT 3	2	4	8.1	9.8	2	2	4	4	6	6	12
TENSILE PSI	54.5	84	244	309.2	60	69	123	141	177	217	286
ELONGATION %	237	311	241	298	124	253	177	324	122	335	195
COMPRESSION @25% @50%	8.5 19.3	17.6 29.9	40 59	57 78	5 14	4 12	9 19	6 16	18 33	6 17	66 11
FROM 110F TO	FMVSS 302	FMVSS 302	FMVSS 302	FMVSS 302	200F	180F	200F	180F	200F	180F	200F

This information is presented to our best knowledge. All test data are average values unless stated and should be considered as guidelines to the performance of this product and should not be used as specifications.

Extruded

Product Characteristics

Energy-absorbent

Resilient

Lightweight and Buoyant

Flexible over a wide temperature range

Engineered foam planks are extremely simple to fabricate. They are non-dusting, lint-free and non-abrasive. They provide substantial cushioning against repeated impacts while reducing shipping costs significantly, they can be die-cut, heat-sealed, welded, glued, saw cut, split, skived, water jet cut, routed and drilled to precise specifications.

Helpful links:
www.pregis.com
www.ivexpackaging.com

PRODUCT	DENSITY (LBS/FT³)	COMPRESSIVE STRENGTH PSI @ 25% DEFLECTION	COMPRESSIVE SET % OF ORIGINAL THICKNESS NOT RECOVERED	TENSILE STRENGTH (LBS/FORCE/IN²)	ELONGATION (%)
1.7 PCF	1.6 - 2	7 - 15	10.6	33
2.2 PCF	NLT 1.80	5 - 9	16 - 22	27 - 30	58 - 65
4.0 PCF	NLT 4.30	14 - 19	9 - 17	60 - 66	42 - 48
6.0 PCF	NLT 5.40	22 - 31	13 - 20	75 - 80	40 - 46
9.0 PCF	NLT 8.80	53 - 67	15 - 22	105 - 110	38 - 42

View our Adhesives